Biomedical Science and Research Journals | Rapid Induction of Orthotopic Hepatocellular Carcinoma in Mice by Fixed Puncture Point Injection

 

Rapid Induction of Orthotopic Hepatocellular Carcinoma in Mice by Fixed Puncture Point Injection

Abstract

Aim: Animal model is an indispensable tool in investigating the development, progression and treatment of human cancer including hepatocellular carcinoma (HCC). However, it is still challenging in establishing orthotopic HCC mouse models. Here, we presented a minimally invasive method with high tumor formation rate in mouse liver.

Methods: Hep3B-luc and SNU-449-luc HCC cells mixed with Matrigel were injected into the liver of nude mice from different source at fixed injection site and depth, respectively. The mice were divided into 3 groups. At fifteen days post-injection, the bioluminescence signal of liver tumor was detected and tumors in injected mouse liver were harvested. Cons and pros were then compared between presented and common approaches.

Results: We successfully developed an orthotopic transplantation tumor model in nude mice by directly injecting the mixture of Matrigel with tumor cell lines at fixed site. The tumor formation rate was 95% for all 20 mice and mice survival rate was 100% after implantation. The detection of fluorescent signals showed that tumors grew in mice with different rates. These fluorescent signal results were consistent with tumor volume results. Pathologic examination further confirmed that the tumors resected from mice liver were HCC.

Conclusion: A fixed site injection of the mixture of Matrigel and tumor cells is a convenient and efficient way with a high success rate and safety in establishing an orthotopic liver transplantation tumor model in mice.

Introduction

Hepatocellular carcinoma (HCC), a very common human malignancies, ranks the second leading cause of cancer-related death in the world, also the fastest-growing cause of cancer deaths in the United States, and the top six cause of death in China among all diseases [1,2]. Lacking early diagnosis method and effective therapy required more efforts to make on HCC treatment. Because of the physiologic and genetic similarities of rodents to human, rodents particularly nude mice are commonly used as models in pre-clinical cancer research experiments, in which the pathological process of human liver cancer and the microenvironment are simulated. To create orthotopic HCC model in mice, the hepatoma cells or tumor fragment must be implanted.

Laparotomy is a conventional approach in tumor implantation, and it has been prevalently employed in many studies, in which induced bioluminescence technique is used for repeated monitoring tumor status [3-5]. However, laparotomy was difficult to operate, time-consuming and invasive. On the other hand, the experimental mice often suffer from adverse events such as bleeding, infection, and even death. Extensive postoperative nursing care is also necessary after the laparotomy approach. Some research groups have developed a better method to create orthotopic HCC (transplantable liver cancer) in mice under the guidance of ultrasound with less experiments-related adverse events compared to laparotomy [4,6]. However, due to the small size of mouse liver, it is prerequisite to have an expensive high-resolution ultrasound machine with a high frequency probe. Even though cancer cells can be directly injected and transplanted into lobe of the liver precisely under the guidance of ultrasound, the procedure still often readily cause bleeding. Therefore, it is important to establish a novel cheap rapid cost-effective approach in HCC research.

Moreover, Matrigel is basement membrane-like extracellular matrix extract that has been used in a series of cancer research, such as facilitating liver tumor models [5]. It is a liquid at 4°C, while it is gelled under physiological conditions at 24-37°C [7]. Matrigel has been reported to be used in orthotopic pancreatic tumor model to effectively prevent leakage from the injection point, improving tumor formation rate, and reducing the risk of intraperitoneal tumor implantation [8]. Whereas few studies have been proposed to improve HCC nude mice model with Matrigel in orthotopic xenograft HCC tumor model in mice. Therefore, we also applied Matrigel with the motivation to improve the HCC tumor formation rate and the safety.

Materials and Methods

Cell culture and transduction of luciferase lentivirus

SNU-449 and Hep3B cell lines were all purchased from American Type Culture Collection (ATCC, USA) in May 2019. Hep3B [5] was cultured in EMEM (ATCC, USA) with 10% fetal bovine serum (FBS, Gibco, USA) and SNU-449 was cultured in RPMI-1640 medium, with 10% heat-inactivated FBS, respectively. Both of them were cultured in the same condition of humidified incubator at 37°C with 5% CO2.  Hep3B-luc and SNU-449-luc were then acquired by CMV-Firefly luciferase-IRES-Puro lentivirus transfection. For details, cell selection was conducted for at least 12 days with 1μg/mL puromycin. Stable fluorescence signal of both cell lines was confirmed by 96 microplate luminometer (Promega, USA). Two cell lines were both characterized using STR (Short Tandem Repeat) analysis for identity verification of human cell lines in 2019.

Preparation of cell suspension for injection

For preparing cell suspension, logarithmic growth phase of the SNU-449-luc (or Hep3B-luc) cells were centrifuged at 500g for 5min. After discarding the supernatant, 50μl medium (10% FBS EMEM or RPMI-1640 medium) contained 5×105 cells (Hep3B-luc or SNU-449-luc) was then mixed with 50ul Matrigel at 4°C by vortex [9]. The mixture without air bubble was then aspirated with a 1.5 ml syringe equipped with 30g needle and stored in 4°C refrigerator. The whole mixture preparation process was recommended to carried out in a 4°C chamber.

Animals

5-6 weeks old male Athymic nude mice, weighing 18-21g, level SPF, were ordered from The Jackson Laboratory (USA) and Charles river (USA), respectively. 5 mice were ordered from The Jackson Laboratory (USA) and 5 from Charles river (USA) at first for preliminary experiment, other 10 mice were then purchased from The Jackson Laboratory (USA) again. Mice were fed by the animal center of School of Public Health of Yale University under specific pathogen-free conditions and were provided with standard food and given free access to sterilized water. All mice were fed 1 week before the injection to adapt the environment. Experimental protocols were approved by the Yale University Institutional Animal care and Use Committee (IACUC), and experiments were carried out strictly to the approved guidelines. The first batch of Charles river 5 mice and Jackson Laboratory mice were divided as group A and B, respectively. Other 10 mice from The Jackson Laboratory were signed as group C. Mice in group A and C were implanted with Hep3B-luc, SNU-449-luc for group B. respectively.

Surgical procedure for orthotopic tumor model

Orthotopic tumors were established by the direct intrahepatic injection of SNU-449‐luc or Hep3B-luc cells, respectively. After preparation of injected cell suspension, mice were anesthetized by 2% isoflurane in an anesthesia tank. The puncture site was then located (2mm below the angle between the mice xiphoid and the left rib, as showed in Figure 1A & 1B). 10% povidone iodine solution followed by 70% ethanol were used for disinfecting injection field of abdominal skin for three times. Then, the 28 G needle was inserted towards mouse liver and into the liver parenchyma traversing. The depth of inserting was about 10mm, and the needle was inserted at a shallow angle (15°). Because of the greater brittleness of the liver tissue, when the needle was accurately inserted, there was an explicit feeling of breakthrough. After the breakthrough, slowly inject the cell mixture. Once the injection was finished, the needle was kept inside for about 10-20s for Matrigel to coagulate and prevent leakage, then the needle was slowly retracted, and gentle pressure was placed on the needle insertion site with disinfectant cotton stick for several seconds. Generally, blood on the head of needle indicated that the injection was successful (Figure 1C).

Biological luminescence analysis experiment

A solution of 15mg/ml fresh Luciferin reagent in DPBS was prepared and filtered through a 0.2um filter. The injection volume received 150mg of luciferin/kg body weight per mouse. The Luciferin solution is administered by intraperitoneal injection. IVIS imaging can be performed after waiting for 10-15 minutes.

Histologic evaluation

Tumors in mice liver in Group C were resected and embedded in paraffin. 4μm sections were cut and stained with hematoxylin and eosin (HE) to be observed as study described [10].

Results

At day 1 post-surgery, all mice were alive after tumor implantation and even 15th after the implantation. The fluorescence signal intensity of 15th day (Figure 2A). There was no significant difference in bioluminescence among all groups (Group A: 2.57±0.768；Group B: 1.857±1.097; Group C: 2.535±1.232) (Figure 3A).

As showed in Fig 3B, all mice in group A and B (10 in total) had been implanted with SNU-449 cells successfully with 100% tumor formation rate on the 15th day after implantation. However, in group C, tumor cells failed to grow and form in one mouse, and the tumor formation rate was 90% for group C at the same time point. The tumor formation rate was 95% for whole 3 groups (20 mice).

Tumors in mice of group C liver were resected and peeled off from mice liver on the 15th day of implantation and also right after IVIS test (Figure 2B). Surrounding tissues of the tumor in mice liver were euangiotic. The volume (mm3) of each tumor in Group C was decided as the formula:

Tumor volume=1/2(Length×Width2) (Figure 3C) [11].

Tumorigenesis was further confirmed by HE staining as showed in Figure 2C. Characteristics of liver cancer cell such as abnormal core, atypia, heteromorphic. cell form, nuclear division were observed.

Discussion

Research in hepatocellular carcinoma have raised furiously in the past decades since the morbidity of this disease kept climbing in the region of America and Asia [12,13]. This makes animal models more needs ever than before since it is an indispensable part of HCC research. At present, HCC can be successfully replicated in rats, nude mice, pigs and other animals, among them, nude mice are more likely to replicate the condition of HCC due to immunocompromise. Currently, several liver cancer modeling methods are often applied in HCC studies, such as orthotopic or ectopic transplantation, drug induction and transgenic model. Moreover, orthotopic model is superior to the ectopic model in the reconstruction of tumor microenvironment and organ tropism. However, there are some practical problems like high-cost, long period of tumor formation in those conventional methods.

Matrigel, as a matrix, has been used more in 3D culture of tumor cells as we reported previously [13]. Studies have shown that diluted matrigel can form a gel drip in the pancreatic parenchyma, effectively preventing leakage from the injection site, improving tumor formation rate, and reducing the risk of intraperitoneal tumor implantation in mouse model [8]. Matrigel provides a fixed framework for cells to grow. Moreover, with the help of Matrigel, the pressing time after injection has been reduced to several seconds compared several minutes in traditional approach for stop bleeding [14].

A novel way of orthotopic liver cancer modeling was presented in this study with fixed puncture site and needle depth which was believed to possess the characteristic of easy operation, time-saving and low-cost compared to the conventional methods with high safety and high tumor formation rate. The post-implantation survival rate of mice in presented method was 100% compared to 60% of routine laparotomy method [15]. For establishing the model, cancer cells must be injected intrahepatically into the mice. The presented approach provided the short period for tumor formation (15 days) with 95% tumor formation rate. This technique is also a recommended method for proof-of-principle demonstration once enough cell lines have been tested. That was why two different HCC cell lines and even different nude mice were applied in this study. Once the injected cancer cells have been transfected with luciferase lentivirus, the tumor formed in liver has become clearly visible and accurately measurable with the help of IVIS has showed in Fig 2A, also the metastatic spread of the tumor could be observed. Moreover, this type of model has widely been used for drug therapeutic efficiency evaluation, toxicity, absorption and pharmacokinetics assessment in preclinical studies. It is thought to be beneficial to explore the pathogenesis of HCC and screen new drugs. Comparation between presented model method and other orthotopic model approaches was showed in (Table 1) and described as followed.

Comparation between presented model method and other orthotopic model approaches

Generally, mouse transplantation models often require open abdominal cavity and expose the left lobe of the liver for tumor cell suspension injection or invasive liver surgery. However, the surgical procedure is comparatively sophisticated, requiring special training, and the sterility requirement is high. Bleeding, infection and even death of mice frequently go along with laparotomy. Postoperative care is another issue. In addition, the success rate of modeling is study-dependent and the possibility of liver cancer cells to spread into the abdominal cavity or adjacent organs of the liver still exist. It has been shown that the laparotomy approach has an extremely high tumor formation rate of 100%, short period latency, typical pathological characteristics and similar metastasis patterns [20]. Compared to this, our method presented more efficient and safer procedure which brought less damage to mice both physically and psychologically, and also still provided high tumor formation rate.

Ultrasound guided implantation is created to avoid direct laparotomy. However, the use of ultrasound requires massive financial support and extra technical training for ultrasound machine operation. Compared to such method, our modeling method is more cost-efficient and easier to operate without the need for professional training while the tumor formation time is similar. However, the injection site of our approach is fixed, that under ultrasound guided is adjustable.

As for chemically induced models, which demands the injection of carcinogenic compounds that are generally divided into genotoxic compounds and promoting compounds. The first one possessed the ability of inducing structural DNA changes and the second one could promote tumor formation after the intervention of hepatotoxic compound such as Peroxisome, Aflatoxin and CCl4 [21]. The chemicals-induced models take 45-104 weeks for tumor formation and used to mimic the cycle of injury-fibrosis-malignancy [22].

Genetically modified mouse models (GMM) are mainly used for evaluating the impacts of oncogenes or oncogenes with other carcinogenic agents in cancer development. This approach requires the establishment of transgenic mice which is high cost and is mainly used for assessing the roles of genes and related pathways in tumor development and carcinogenesis [23].

Xenograft model are mainly divided into three types. One is ectopic model which is established by subcutaneously injecting cancer cells in the flank of mice. One is hollow fiber assay (HFA) which extra requires the application of high-cost small semi-permeable tubes and cannot test complex tumor-host interactions such as cancer metastasis. The other one is Genetically modified mouse models (GMM), a high-cost method which requires 90-100 weeks for tumor formation. The liver of the nude mice has a definite anatomical location, and the liver lobe is shallow in the upper abdomen.

Therefore, in this study, we accurately located the injection site of mice liver without the guidance of ultrasound. In the present study, after 15 days of cell suspension injection, IVIS system was used to detect the fluorescence signal of implanted tumor, the tumor formation rate was achieved 95%. Combined with the ingenious application of matrigel, orthotopic implantation, fluorescence imaging, this method has been proved to be a reliable tool for establishing an HCC model in mice with acceptable tumor formation rate and safety, which might be widely used as an improved convenient HCC modeling method to promote liver cancer research. One thing should be noticed is that multiple cell lines should be used when conducting proof-of-principle study due to the remarkable variations in cancer cell phenotypes of different cell lines. However, this shortcoming could be partly fix by using biopsy sample (PDX model) [24].

Declarations

Ethics approval and consent to participate.

Mice were fed by the animal center of School of Public Health of Yale University under specific pathogen-free conditions and were provided with standard food and given free access to sterilized water. Experimental protocols were approved by the Yale University Institutional Animal care and Use Committee (IACUC), and experiments were carried out strictly to the approved guidelines.

Availability of Data and Material

All row date is available.

Acknowledgement

None.

Funding

None.

Authors’ Contributions

Dr. Han and Dr. Lu designed the research. Dr. Han conducted the animal experiments. Dr. Han and Dr. Zhao performed data analysis. All authors contributed to manuscript writing.

Competing interests

None.

For More information: https://biomedgrid.com/fulltext/volume11/rapid-induction-of-orthotopic-hepatocellular-carcinoma-in-mice-by-fixed-puncture-point-injection.001665.php

Know More Information: Biomed Grid Please Click on : https://biomedgrid.com

For More information: Open Access Journals of Biomedical Science and Research: Journal of Biomedical Science 

Know More Information: Biomed Grid Please Click on : https://biomedgrid.com